Allis Chalmers 7G series B Drive Sprocket Segments
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205886
Printed Date: 16 Mar 2025 at 3:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers 7G series B Drive Sprocket Segments
Posted By: wackywacodude
Subject: Allis Chalmers 7G series B Drive Sprocket Segments
Date Posted: 15 Mar 2025 at 10:20pm
| Hello, just recently purchased a 7GB and the drive sprockets are pretty worn but other than that the machine seems pretty good. I was wondering if anyone knows where to buy new or even possibly a good used set. Thanks in advanced! |
Replies:
Posted By: DiyDave
Date Posted: 16 Mar 2025 at 3:46am
|
Zimmerman is one source: https://www.crawlerbulldozer.com/" rel="nofollow - https://www.crawlerbulldozer.com/ Closer to you is Stephenson: https://www.stephensonequipment.com/?srsltid=AfmBOoqeQ5hOlEx4InaBl4VkHHL-ox3AkHyFx5p1NkEJphztimgrmDk7" rel="nofollow - https://www.stephensonequipment.com/?srsltid=AfmBOoqeQ5hOlEx4InaBl4VkHHL-ox3AkHyFx5p1NkEJphztimgrmDk7 Free advice: check the manual for the track segment count, then count the number on your tractor, make sure that its the same. Unscrupulous "mechanics" will sometimes cut a link out of the track to give the appearance of a tight UC, but in reality this practice accelerates wear. As these UC parts are approaching unattainable, it is a common ploy to cut a link out, make a quick profit off some sucker, and run like hell... Welcome to the forum!  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |