FRONT ENGINE PLATE
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205767
Printed Date: 14 Mar 2025 at 4:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: FRONT ENGINE PLATE
Posted By: SIMPLICITY
Subject: FRONT ENGINE PLATE
Date Posted: 07 Mar 2025 at 6:58pm
|
LOOKING FOR A FRONT ENGINE MOUNTING PLATE FROM A D-21, 210 , OR 220
|
Replies:
Posted By: injpumpEd
Date Posted: 08 Mar 2025 at 9:31am
just an fyi, the D21 is it's own animal, the 210/220 are the same as each other and frame mounts are wider than the D21.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: SIMPLICITY
Date Posted: 08 Mar 2025 at 12:11pm
|
I WANT TO PUT AN L2 ENGINE IN A BOAT AND I NEED THE HYD PUMP MOUNTING BRACKET HOLE TO HAVE HYD. FOR STEERING. I'LL HAVE TO MODIFY THE MOUNTING ANY WAY SO THE WIDTH DOESEN'T MATTER
|
Posted By: injpumpEd
Date Posted: 10 Mar 2025 at 9:41am
I looked up the number for them on agco parts books, then searched ebay and found rock valley tractor parts had what I needed a few years ago when I needed another for a 210. That's where I'd look.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Calvin Schmidt
Date Posted: 13 Mar 2025 at 11:55am
|
Any 426 industrial engine has the removable plate to install the hydraulic pump. Have one in my one 220
-------------
Nothing is impossible if it is properly financed
|
Posted By: d17brown
Date Posted: 13 Mar 2025 at 7:03pm
I have one, Farley iowa
-------------
phil
|
|