Farm Equipment - 7010 - Oil and smoke coming out of dipstick

Print Page | Close Window

7010 - Oil and smoke coming out of dipstick

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205692
Printed Date: 27 Jul 2025 at 7:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7010 - Oil and smoke coming out of dipstick

Posted By: calico190xt68
Subject: 7010 - Oil and smoke coming out of dipstick
Date Posted: 02 Mar 2025 at 10:59am

Haven't started the tractor since this fall. Noticed that I have oil coming out of the oil dipstick. When I removed the oil dipstick, smoke was coming out of it. Breather tube doesn't have a lot of blowby coming out of it. Tractor seems to be running just fine. Sounds the same as always. I am guessing my oil pressure is building up for some reason. I also am not getting diesel fuel in the oil. In fact, dipstick says I need to add oil like it is burning oil.

Not sure how to pinpoint the problem. Any help is appreciated.

-------------
80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC

Replies:

Posted By: DrAllis
Date Posted: 02 Mar 2025 at 11:31am

Stand on the front tire and with a flashlite check the COOLANT level in the radiator. OK ?? or not OK ?? If OK, remove the blowby hose and wash it out with a power washer to be absolutely sure it is CLEAN on the inside. Triple check the engine oil level, making sure it isn't OVER FULL at all. OK? or not OK ?? If OK, install the dipstick fully and don't worry about it, BUT keep an eye on it for oil consumption, or fuel dilution.