Print Page | Close Window

AC 5015 differential and final drive

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204932
Printed Date: 21 Feb 2025 at 6:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC 5015 differential and final drive
Posted By: nhmath
Subject: AC 5015 differential and final drive
Date Posted: 13 Jan 2025 at 3:02pm
Hi, Changed left rear axle housing oil seal . Reassembld and lowered and leak worse then before. Raised up and noticed some play in the axle. I think the bearing might be bad. Any ideas on changing the bearing without removing the complete rear housing? Any suggestions would be welcome.
I have never taken anything like this apart before. 
Thank you 
Neil



Replies:
Posted By: orangeman
Date Posted: 14 Jan 2025 at 1:40pm
https://www.ebay.com/itm/256131108075-" rel="nofollow - https://www.ebay.com/itm/256131108075- this might help, not mine - very pricey! ~ Orangeman 


Posted By: nhmath
Date Posted: 15 Jan 2025 at 7:40am
Thank you. Have one already!


Posted By: Pferdestärke23
Date Posted: 25 Jan 2025 at 12:04am


"Oil seal replacement rear axle(HINOMOTO E16)ENGINE:S110"
https://youtu.be/119iFCg6Oxksi=_XxN9aBey7cqjIwL" rel="nofollow - https://youtu.be/119iFCg6Oxksi=_XxN9aBey7cqjIwL


This video is about a
Hinomoto E16.

( Your Allis Chalmers 5015 is a
  Hinomoto E18 w/ orange paint. )

To remove bearing
( as is glimpsed in Vid ),
you must destroy it.

Drive a Pointed Punch
between the outside
bearing race and the
axle housing in order
to "fold it up".

Are you ready ?

Then . . .
Grit Teeth and Begin !

( Have no mercy . . . )




Posted By: nhmath
Date Posted: 25 Jan 2025 at 8:23am
Thank You. 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net