Print Page | Close Window

Allis wd45 distributor gasket none like mine

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204633
Printed Date: 25 Dec 2024 at 12:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis wd45 distributor gasket none like mine
Posted By: Orangeypeach99
Subject: Allis wd45 distributor gasket none like mine
Date Posted: 20 Dec 2024 at 6:26pm
Mine has the same holes as all the other ones I've found online but my distributor has a guide stud on it any help to find gasket?



Replies:
Posted By: wjohn
Date Posted: 20 Dec 2024 at 7:18pm
If I understand correctly you just need an additional hole in the gaskets you're seeing online in order for it to work in your setup?

-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45


Posted By: AaronSEIA
Date Posted: 21 Dec 2024 at 5:20am
Don't think I've ever seen a gov housing with a locate dowel.  Either way, just punch the extra hole you need in the gasket and bolt it on.
AaronSEIA


Posted By: DrAllis
Date Posted: 21 Dec 2024 at 7:24am
If the governor housing (NOT the distributer !!) has a small line-up dowel, that is for the timing gears backlash !! Each engine may be a little different and yes, the gasket, which has no holes, gets that hole punched in it.


Posted By: wjohn
Date Posted: 21 Dec 2024 at 9:16am
I bought a set of these years ago and I use them all the time:

https://www.harborfreight.com/9-piece-hollow-punch-set-3838.html" rel="nofollow - https://www.harborfreight.com/9-piece-hollow-punch-set-3838.html


-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45


Posted By: WF owner
Date Posted: 22 Dec 2024 at 7:21am
X 2 wjohn!


Posted By: Gary
Date Posted: 22 Dec 2024 at 7:59am

X3 wjohn

I drilled a bunch of various sized holes part way in to the side of a piece of 2 X 3 and mounted it to the wall.

Now my punches are always within reach'

G



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net