Part help ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204463
Printed Date: 03 Feb 2026 at 11:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Part help ID
Posted By: Mikez
Subject: Part help ID
Date Posted: 08 Dec 2024 at 11:20am
|
Hello Have this bracket 580551 that I thought was for 2300 disk that holds the gang bar to frame but measured differently. But I thought the latter 2300 disk with the black gang bars were bigger. Any help would be appreciated. Thanks    |
Replies:
Posted By: Mikez
Date Posted: 31 Dec 2024 at 12:46pm
| Bump |
Posted By: Ryan Renko
Date Posted: 31 Dec 2024 at 5:48pm
| We have a 2300 with black gangs that I can measure tomorrow. Ryan |
Posted By: Mikez
Date Posted: 31 Dec 2024 at 6:37pm
|
Thanks Ryan. |
Posted By: Alvin M
Date Posted: 01 Jan 2025 at 5:50am
| New # is 70350674 And it fits the 2200 Series |
Posted By: Mikez
Date Posted: 03 Nov 2025 at 3:47pm
 Hi Ryan, Alvin sorry I didn’t back to this topic, could check your black bar disk to see if like first picture Alvin thanks I seen that cross over to but the measurements aren’t the same. Here’s a 350674. Thanks for any help |
Posted By: Ryan Renko
Date Posted: 03 Nov 2025 at 5:40pm
| I just saw your post and sadly it's dark in the barn now with the time change. I will definitely try tomorrow evening. |
Posted By: Mikez
Date Posted: 03 Feb 2026 at 8:10pm
|
Hello all. I would say this is the difference. This picture is of 2300 disk with folding wings. Seems the disks with wings have larger square tubes.  This picture is 2300 disk. None folding. Square tube is thinner.  |