Perkins - 4-236- starter nose cone
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204207
Printed Date: 19 Nov 2024 at 6:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Perkins - 4-236- starter nose cone
Posted By: Coke-in-MN
Subject: Perkins - 4-236- starter nose cone
Date Posted: 17 Nov 2024 at 6:58pm
Second one that has broken off starter in last 5 years .
Full housing cracked free from rest of body about 1/2 was back to mounting flange /
Fished the broken cone part out from behind flex plate so it's free now , found I have 3 starters with the 3 bolt flange so might be lucky and interchange ,
When i had my HD4 - 2200 diesel engine - had cone break and ended up grinding cast down and welding it back together and lasted until I sold machine about 5 years later
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Replies:
Posted By: orangeman
Date Posted: 18 Nov 2024 at 7:54am
|
Whole starter here: https://parts4engines.com/products/perkins-4-236-starter-motor?srsltid=AfmBOoo-nHvZylSyM83Jngvax9sIC7i_bOMtOwW9O0KztGZTMkDXjJJG" rel="nofollow - https://parts4engines.com/products/perkins-4-236-starter-motor?srsltid=AfmBOoo-nHvZylSyM83Jngvax9sIC7i_bOMtOwW9O0KztGZTMkDXjJJG
|
Posted By: PaulB
Date Posted: 18 Nov 2024 at 11:59am
Is the a casting number on the nose cone? I have a few NOS starter nose cones.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: Coke-in-MN
Date Posted: 18 Nov 2024 at 1:37pm
Found a cone in my parts stash - but had 3/8 bolt holes in casting , one that came off has clearance for larger bolts yet bell housing used 3/8 bolt to hold it on . As there is a spacer block between flex plate and starter mount to bell housing that sets the depth it should work even though the holes there are larger .
The way the system is set up - least the broken piece stayed on the starter armature and didn't get hung up and break something else .
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|