Print Page | Close Window

HD9B 4-71 Oil Filter Cartridge

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204128
Printed Date: 22 Nov 2024 at 8:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: HD9B 4-71 Oil Filter Cartridge
Posted By: JimCPaso
Subject: HD9B 4-71 Oil Filter Cartridge
Date Posted: 11 Nov 2024 at 11:39pm
Hi all,

I've been resurrecting our old HD9B and it's actually running very well, thankfully! I've been searching the web for a replacement oil filter cartridge with absolutely no luck. The existing (30 yr. old!) cartridge is about 6 in. long and 3 5/8 in. diameter. The outer housing has a label on it with AC markings as opposed to General Motors. The filters I've found for the 4-71 are substantially larger in length and diameter.

By chance, would any of you know of a source for the stock HD9B oil filter cartridge? Many thanks in advance.

Jim








Replies:
Posted By: DMiller
Date Posted: 12 Nov 2024 at 3:34am
AC was at one time a division of GM, what number is present on that cartridge can?

By one listing a WIX 51242 just under 6” long and 3 5/8” diameter should be it. Should be a spring and cup at bottom of housing that keeps the filter against the engine side filter head.


Posted By: Mikez
Date Posted: 12 Nov 2024 at 7:14am
Does anyone have the allis part number


Posted By: PaulB
Date Posted: 12 Nov 2024 at 7:22am
The WIX 51242 crosses to a Fleetguard LF587 which you should be able to get at any Heavy Duty truck parts place, or directly from Fleetguard. 

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY


Posted By: JimCPaso
Date Posted: 13 Nov 2024 at 12:54am

DMiller: The label on the outer housing was illegible. However, I didn't think of looking for markings on the cartridge itself. I'll do that over the weekend. Also, there's a spring and large flat washer inside the housing and on TOP of the filter cartridge. I didn't pull the cartridge out far enough to have a look underneath. More to come...

Thanks to everyone for the very helpful feedback.


Posted By: JimCPaso
Date Posted: 16 Nov 2024 at 11:40am
OK. I pulled the existing filter and the PN (WIX 51005) was printed on it. I purchased the LF530 and will post a fitment update once it arrives.


AC 079640 - Discontinued

WIX 51005 - Discontinued

Fleetguard LF530 - Available




Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net