wd lift arm hydraulic hoses
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204115
Printed Date: 22 Nov 2024 at 12:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wd lift arm hydraulic hoses
Posted By: Jaybird14
Subject: wd lift arm hydraulic hoses
Date Posted: 11 Nov 2024 at 8:12am
|
please help. I need a supplier for my WD's rear hydraulic hoses. Thanks!! Jay
|
Replies:
Posted By: Allis dave
Date Posted: 11 Nov 2024 at 8:18am
| You can do to any local place that makes hydraulic hoses to make you some. I had the local John Deere dealer make mine. Most NAPA stores can also make them. Mkae sure they use at least 4000PSI hose. You'll want a swivel on one end. |
Posted By: Mikez
Date Posted: 11 Nov 2024 at 8:21am
| Pretty sure we have both. I’ll double check and get back to you |
Posted By: DSeries4
Date Posted: 11 Nov 2024 at 2:24pm
|
Take your old ones to a local hydraulic shop. They will make new ones. Have done it many times. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DaveKamp
Date Posted: 11 Nov 2024 at 9:04pm
|
My local industrial hydraulics outfit is the NOTT Company. I carried in a hose, they made a replacement. One necessary piece of knowledge, is that tractors prior to the early-mid '60's most frequently used high-pressure/low volume hydraulics... that's 3-5000psi, and fairly small-diameter hose. 60's on, most went with low-pressure/high volume, so 1000-2500psi or so. The WD rear lift cylinders are high pressure low volume, and will be fairly small ID... 1/4" probably. ------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: Ed (Ont)
Date Posted: 11 Nov 2024 at 10:16pm
I got mine from Agco a few years ago. 
|
Posted By: Jaybird14
Date Posted: 12 Nov 2024 at 6:24am
| could you order them on line? |
Posted By: PaulB
Date Posted: 12 Nov 2024 at 7:11am
|
Allis Chalmers was the only company to use a High Pressure Low Volume hydraulic system, All others used a low pressure system. Some were as low as 1,000 PSI. http://www.SurplusCenter.com" rel="nofollow - www.SurplusCenter.com has good quality hydraulic hoses and most likely half the price for the same thing you'd get made at any local shop, using the same components. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |