172 rotary mower driveline nut
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203898
Printed Date: 22 Nov 2024 at 1:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 172 rotary mower driveline nut
Posted By: Phillme2
Subject: 172 rotary mower driveline nut
Date Posted: 30 Oct 2024 at 3:44am
Hey I’m looking to get some assistance in trying to find the nut or nut that go on to hold the spring to the slip def on a 160 or 172 mower. I can’t seem to find the size or anywhere to get one. If you have any assistance I’d greatly appreciate it. 
|
Replies:
Posted By: DiyDave
Date Posted: 30 Oct 2024 at 4:27am
Measure the diameter and thread pitch in tpi and then go to McMaster Carr. IIRR, you need 2 half nuts and a lock ring. the lock ring can be made out of a thin, keyed flat washer, that is hammered over 3 flats of the first nut, then hammered over 3 flats of the second nut...
------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Mikez
Date Posted: 30 Oct 2024 at 7:47am
|
Welcome to the forum. Do you have the spring. Then there’s a special washer and two nuts. I’ll look. We should have all three things if you need
|