Cab Fit
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203867
Printed Date: 22 Nov 2024 at 12:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Cab Fit
Posted By: Harris82
Subject: Cab Fit
Date Posted: 28 Oct 2024 at 3:04am
| I recently purchased a 1964 D17 and live in MN. I would like to put a cab on it for the winter months and found a nice Year-A-Round that was taken off of a 190XT. Before purchasing, I wanted to verify that this would fit on a D17. Any insight would be helpful. Thanks! |
Replies:
Posted By: DrAllis
Date Posted: 28 Oct 2024 at 6:12am
| NO. Not only won't fit, it is probably too short for height if you do try and butcher it onto a D-17. Not knowing how skilled of a fabricator you are, there is no way it will fit as-is. Can you fit a saddle on a sow ?? maybe....... |
Posted By: Harris82
Date Posted: 28 Oct 2024 at 6:35am
|
I wasn’t too confident it would and if it required a lot of modifications I would’ve probably passed. Not looking to butcher the D17 even a little bit. It’s too nice for that. Thanks for the reply! |
Posted By: Allis dave
Date Posted: 28 Oct 2024 at 7:13am
| I've only seen a couple picture ever of cabs made for a D17. I heat houser would be your best bet. |
Posted By: Mikez
Date Posted: 28 Oct 2024 at 7:59am
|
This cab would fit your D17. Don’t know where you would find one though  |
Posted By: Tim NH
Date Posted: 28 Oct 2024 at 8:38am
|
I have seen pictures of two D 17's with Full Vision cabs on them. I thought they looked pretty good. But the way the door opens doesn't leave much room for getting in or out. Tim ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: SteveM C/IL
Date Posted: 28 Oct 2024 at 9:27am
| X2 on the heat houser |