Farm Equipment - AC 2300 disc question;

Print Page | Close Window

AC 2300 disc question;

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203821
Printed Date: 22 Nov 2024 at 12:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC 2300 disc question;

Posted By: KJCHRIS
Subject: AC 2300 disc question;
Date Posted: 24 Oct 2024 at 5:06pm

Can anyone tell me what size the center hole is on the disc blades.?

They were 20" when new if that matters. A 1 1/2" square hole comes to mind but I can't find my Book for it. That seems pretty large on this older disc. been many years since I've had a gang apart on it. I could use 2 or more blades 18" - 20" blades.

Cracked 1 & broke 1 on piece of junk concrete in an old building site this morning.

Anyone have a complete middle buster sweep ass'y they'd part with?

I'm in W C Iowa, can travel reasonable distance for parts.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,

Replies:

Posted By: PaulB
Date Posted: 24 Oct 2024 at 5:33pm

I'm not really close to you, however I have some NOS disc blades with a 1-1/2" square hole. I have a twelve 16" smooth, two 18" notched and one 18" smooth all with a 1-1/2" square hole. I'd sell them for $10 each +shipping.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: KJCHRIS
Date Posted: 24 Oct 2024 at 6:08pm

PaulB, thanks for reply. In future may be interested in the 2 18" notched, the shipping may be a killer on Md to Iowa.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,