Farm Equipment - Agco allis 9695 error code

Print Page | Close Window

Agco allis 9695 error code

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203806
Printed Date: 23 Nov 2024 at 8:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Agco allis 9695 error code

Posted By: Acguywill
Subject: Agco allis 9695 error code
Date Posted: 24 Oct 2024 at 9:19am

Transmission code E15. Manual says transmission coil temperature low 10f or below. It comes up at all temperatures but doesn't affect anything just has the alarm going off. What coil would it be referring to? Dealer hasn't been able to answer the question.

Replies:

Posted By: Lynn Marshall
Date Posted: 24 Oct 2024 at 6:39pm

Error code E15 can happen when coil MC1 is cold,below 10°. Or,the sensor input line is shorted to+12 VDC. Or, the sensor input line is open. When looking at the valve body, where the coils are attached, MC1 is the third from the bottom on the front row of coils.

Posted By: Lynn Marshall
Date Posted: 24 Oct 2024 at 7:16pm

The actual transmission oil temperature sensor is located on or near the transmission oil filter head.

Posted By: Acguywill
Date Posted: 25 Oct 2024 at 11:23am

Thanks, I will look into it when I have time.