Farm Equipment - AC 170 Gas crankshaft pulley install

Print Page | Close Window

AC 170 Gas crankshaft pulley install

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203602
Printed Date: 22 Nov 2024 at 6:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC 170 Gas crankshaft pulley install

Posted By: AddictedtoAllis
Subject: AC 170 Gas crankshaft pulley install
Date Posted: 10 Oct 2024 at 11:44pm

Anyone have any advice or know the proper way to install a crankshaft pulley on an AC 170 gas crankshaft?

Thanks

Replies:

Posted By: AaronSEIA
Date Posted: 11 Oct 2024 at 5:42am

Nothing special to it. Slide it on and run the setscrew into the dimple of the crank. If the engine is still in the tractor, I'd about bet the steering pedestal has to come off first.

AaronSEIA

Posted By: DrAllis
Date Posted: 11 Oct 2024 at 5:56am

Be sure to get the set screw TIGHT so the pulley doesn't shake loose after a time. The pulley should fit the snout of the crankshaft slip fit tight. It cannot be loose on the crank. If so, I have a repair for that.

Posted By: AddictedtoAllis
Date Posted: 11 Oct 2024 at 10:50pm

Thanks guys! Appreciate the quick reply!