Farm Equipment - 65' Allis Chalmers 190xt throw out bearing

Print Page | Close Window

65' Allis Chalmers 190xt throw out bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203576
Printed Date: 22 Nov 2024 at 6:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 65' Allis Chalmers 190xt throw out bearing

Posted By: whizone
Subject: 65' Allis Chalmers 190xt throw out bearing
Date Posted: 08 Oct 2024 at 9:22pm

All, can anyone tell me if you can grease or oil the tractors throw out bearing? Mine has been making a chirping noise for quite some time and sounds like it needs some grease or oil? Any ideas not related to a replacement..

Thanks,

65' Allis Chalmers 190xt

Replies:

Posted By: DSeries4
Date Posted: 09 Oct 2024 at 8:42am

No it can't. Time to split and replace.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: SteveM C/IL
Date Posted: 10 Oct 2024 at 10:14am

It's giving you fair warning. Better fix it before it starts cutting off fingers.

Posted By: whizone
Date Posted: 10 Oct 2024 at 9:03pm

Strangely enough it stopped making noise today. Thanks for help.

Posted By: Lynn Marshall
Date Posted: 10 Oct 2024 at 9:22pm

That bearing shouldn't be spinning unless you are stepping on the clutch pedal. Make sure that you have some free play in the clutch pedal, by adjusting the rod. Once adjusted,spraying some oil on bearing, may help to get by until it can be properly serviced.