190XT gas tractor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203568
Printed Date: 22 Nov 2024 at 5:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT gas tractor
Posted By: 6wheeler
Subject: 190XT gas tractor
Date Posted: 08 Oct 2024 at 11:02am
|
Hi all. New guy here. I need some help with my 190XT w/500 loader gas tractor. The exhaust is junk on it. I ordered a muffler and threaded pipe that would thread into thread into the exhaust manifold from Djs tractor parts. The muffler is right. But, the threaded pipe they sent is way too small. He said he cannot get a larger pipe. It has a G2800 engine and the pipe looks as though it could be an 2 1/4" threaded pipe but I am not sure. Or, if I can even find the proper pipe. Would anyone know where I can get the right pipe? Or, what you have used? The tractor runs great and everything works on it. Except for the exhaust. Thanks in advance. Pat
|
Replies:
Posted By: DrAllis
Date Posted: 08 Oct 2024 at 11:09am
|
If your exhaust manifold is good, you are lucky. That pipe is just threaded water pipe. Can't tell you the size, but 2 inch or more I'd guess.
|
Posted By: DanWi
Date Posted: 08 Oct 2024 at 11:13am
|
A good Ace hardware store or similar. Menards etc.
|
Posted By: plummerscarin
Date Posted: 08 Oct 2024 at 6:09pm
|
2" iron pipe would have an OD of approximately 2⅜"
|
Posted By: DSeries4
Date Posted: 09 Oct 2024 at 8:46am
a local welding and fab shop might have a bit of pipe the size you need in their scrap bin. You don't need a long piece.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|