On the hunt for a B&S Vanguard repair manual..
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203489
Printed Date: 05 Oct 2024 at 12:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: On the hunt for a B&S Vanguard repair manual..
Posted By: desertjoe
Subject: On the hunt for a B&S Vanguard repair manual..
Date Posted: 04 Oct 2024 at 1:05am
|
I am in need of a repair manual for an 18 HP V twin Vanguard Briggs And Stratton. Model=350447 Type = 1080-A1 Code= 96012 411 I've tried Ebay and Amazon but no luck so far,,,,? Anyone got an idee,,,??
|
Replies:
Posted By: Lars(wi)
Date Posted: 04 Oct 2024 at 7:59am
Just by chance Joe, is that engine in a Craftsman lawn tractor? ------------- I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science. |
desertjoe wrote:Posted By: steve(ill)
Date Posted: 04 Oct 2024 at 8:18am
|
not cheap, but......... https://backwaterperformance.com/products/vanguard-ohv-v-twin-repair-manual?srsltid=AfmBOorjH3vSdXRBacAm1JRDHh13dBqogdTkSKHpDxpd8fUl-wpTlEfQ" rel="nofollow - https://backwaterperformance.com/products/vanguard-ohv-v-twin-repair-manual?srsltid=AfmBOorjH3vSdXRBacAm1JRDHh13dBqogdTkSKHpDxpd8fUl-wpTlEfQ ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 04 Oct 2024 at 8:21am
your not going to get that SPECIFIC... All Vaanguard engines would be VERY similar and all in the same manual... 18- 20 -22 - 24 HP all the same ... verticala shaft / horizontal shaft... ... AMAZON.. ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 04 Oct 2024 at 8:24am
|
parts diagram... https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/briggs-stratton/briggs-stratton-engine/200000-399999-series/350400-to-350499/350447-0115-01" rel="nofollow - https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/briggs-stratton/briggs-stratton-engine/200000-399999-series/350400-to-350499/350447-0115-01 ------------- Like them all, but love the "B"s. |
Posted By: HudCo
Date Posted: 04 Oct 2024 at 8:27am
| manual part number 272144 your local mower shop should be able to get it for you list price 38.84 |
Posted By: desertjoe
Date Posted: 04 Oct 2024 at 8:29am
Hey Lars,,I'm not sure,,most mower engines are verticle shaft,,the one I need is a horizontal shaft,,,Thanks.
|
Posted By: desertjoe
Date Posted: 04 Oct 2024 at 8:31am
Hey Steve,,I did look at this one,,but saw no mention of it covering the 350447 model,,,? Thanks,,!!
|
Posted By: desertjoe
Date Posted: 04 Oct 2024 at 8:34am
Thank you Hudco,,I'll look into this one,,,,Thanks
|
Posted By: jaybmiller
Date Posted: 04 Oct 2024 at 8:34am
|
I used to download manuals from B&S website...maybe you still can ?? BTW yours was made Jan 24th 1996. I've been told Vanguards are the 'top of the line', better bearings and such but a LOT of 'common' parts. FYI the 'wires' connecting the coils to mag have diodes inside the heat shrink. If one diode fails open, that cylinder will still run.... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 04 Oct 2024 at 8:37am
|
Joe, as good of a mechanic as your are, i doubt you even NEED a manual... I took a horizontal shaft motor 15 years ago and MODIFIED a couple parts to use it as a vertical shaft motor... I rebuilt it last week without a manual... Pretty basic.. When i had a question, i just looked at You Tube for some details.... ALL the vanguard engines will have the same pistons / cam / clearances / specs.... Usually they just changed the bore 1/8 inch to go from 16 -18-22 HP output.. You can adjust the governor to get 3000 - 3600 rpm max speed... really that is the ONLY difference in all the Vanguard engines. ------------- Like them all, but love the "B"s. |
Posted By: desertjoe
Date Posted: 05 Oct 2024 at 7:53am
Well, Steve,,Many Thanks for the vote of confidence,,,,
 Most times if I disassemble one, I do pay close attention and I can assemble it OK, and,,,,,and,,,I usually do find a place for all the nuts and bolts with no left overs,,,, I do like to have access to any wiring diagrams tho as some shade tree'ers do tend to cut wires during their troubleshooting,,,,, |