George Prince Collection
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203213
Printed Date: 23 Nov 2024 at 1:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: George Prince Collection
Posted By: bigal121892
Subject: George Prince Collection
Date Posted: 15 Sep 2024 at 1:11pm
|
I went to the open house yesterday, here are some photos I took. https://www.flickr.com/photos/190983497@N04/albums/72177720320343071" rel="nofollow - https://www.flickr.com/photos/190983497@N04/albums/72177720320343071"
|
Replies:
Posted By: GeneD14
Date Posted: 15 Sep 2024 at 3:29pm
|
Great pictures! Thanks!
|
Posted By: DiyDave
Date Posted: 15 Sep 2024 at 3:35pm
5th picture... WF industrial with a flail cutter? Never seen one a them... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Gary
Date Posted: 15 Sep 2024 at 3:57pm
|
5th picture with belly flail mower is not a WF. Either a late WD with curved Shifter or a WD-45, - rear axle is located way below side rails - 8 bolt power shift rears G |
Posted By: ac hunter
Date Posted: 15 Sep 2024 at 4:00pm
| There are a couple pictures of a Sheppard Diesel with what appears to me to be a Temple-ton loader. Were made in Lexington, Ohio. Thanks for sharing those pictures with us. |
Posted By: bigal121892
Date Posted: 15 Sep 2024 at 4:58pm
|
The 5th picture, is a WD45, and that is not a flail mower. That is a magnet, that was used on military bases, for picking up spent ammo. I should have gotten more pictures of this, but underneath the right rear axle, there is a generator, that drives off of the PTO. |
Posted By: DiyDave
Date Posted: 15 Sep 2024 at 5:32pm
|
Steel Ammo? Well I learned a couple things, today! ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: bigal121892
Date Posted: 15 Sep 2024 at 7:07pm
It's differently a magnet, and this is what I was told it was used for.
|
DiyDave wrote: