Farm Equipment - D17 Draw bar hitch

Print Page | Close Window

D17 Draw bar hitch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203145
Printed Date: 23 Nov 2024 at 5:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Draw bar hitch

Posted By: D17puller
Subject: D17 Draw bar hitch
Date Posted: 11 Sep 2024 at 8:12am

Sorry for my crazy question but I’m new to AC tractors & need guidance !

Question : for a D17 tractor
Is the rear draw bar & rear draw bar hitch assembly that the draw bar slides thru with the 2 arms on it the same on any other models if AC tractors

Replies:

Posted By: IBWD MIke
Date Posted: 11 Sep 2024 at 9:17am

Draw-bars and bails do very from model to model. I'm sure it's possible to mix and match the bars at least though have never tried it. I keep one for a 45 set up as short as possible for tractor pulling.

Posted By: PaulB
Date Posted: 11 Sep 2024 at 7:46pm

The Drawbar "bail" will interchange between a D14, D15, D17 I, D17 II & D17 III. The D17 IV is different. The Drawbar itself is lighter for a D14 & D15 but I don't know if the length is the same as the early D17s.

The W_ tractors and D19 are completely different than a D17.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY