D-17 Brake Adjustment.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203086
Printed Date: 23 Nov 2024 at 4:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-17 Brake Adjustment.
Posted By: Brian G. NY
Subject: D-17 Brake Adjustment.
Date Posted: 07 Sep 2024 at 3:17pm
|
Going to be Bush Hogging and I like the brakes working really good because I have a lot of steep banks to traverse. What started out to be a very simple routine job became a little more time consuming due to critters building a nest in the RH housing.A whole pile of stuff.....took a lot of fishing with a wire hook and finally blowing out with compressed air. When I installed the brakes I put a plug in the big ol' hole in the bottom of the housing but I guess there was plenty enuf room at the hole where the rod comes in to let them in. I'm glad I discovered this because quite a few years ago when I was using my WD-45 for the job, there was a nest that caught fire inside the housing on tha tractor.     ALSO......I put new brake shoes on this tractor when I first got it. I followed the manual explicitly including setting the brake rod ends 20-15/16" from the toggle pin. The RH brake pedal was always a little lower than the LH which makes even braking with just one foot a little "hairy". So......I decided to simply screw the rod in a little on the RH side and get the pedals even. Worked like a charm!
|