D19 governor help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203018
Printed Date: 23 Nov 2024 at 4:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 governor help
Posted By: ToddnwIl
Subject: D19 governor help
Date Posted: 03 Sep 2024 at 4:12pm
Our d19 has started revving on its own. It will idle down with the throttle but will revv up on its own. We checked all the linkages. Nothing was bound up. So we pulled the governor off the motor. Everything looks normal. We can spin the gear and hold the weights... is that normal. To our thinking the weights should be attached to the shaft.
|
Replies:
Posted By: DrAllis
Date Posted: 03 Sep 2024 at 6:38pm
| You have diagnosed it correctly. I don't know if there's room to weld it or not. |
Posted By: ToddnwIl
Date Posted: 03 Sep 2024 at 7:50pm
| If I do weld it do I have to be concerned about balance? The chances of finding a new or good used one are gona be tuff! |
Posted By: DrAllis
Date Posted: 03 Sep 2024 at 7:58pm
| The weld will be almost in the center of the rotating mass, so balance won't be an issue. |
Posted By: ToddnwIl
Date Posted: 05 Sep 2024 at 4:17pm
Just wanted to post an update.
|
Posted By: Model 70
Date Posted: 05 Sep 2024 at 8:12pm
| I have one welded like that in one my D19’s been working fine for years now |
Posted By: ToddnwIl
Date Posted: 05 Sep 2024 at 8:16pm
| Hopefully this fix works. My grandpa bought this tractor new so it rather special to us. It grinds two loads of feed a month and rakes hay. |