D15 Series II Intake manifold
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202896
Printed Date: 23 Nov 2024 at 7:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 Series II Intake manifold
Posted By: RP Farms
Subject: D15 Series II Intake manifold
Date Posted: 27 Aug 2024 at 7:33am
| On my dads D 15 Series II there is a crack in the intake manifold. I might be able to braze it but I got to pricing a new one and I am finding alot of D14/D15 manifolds but I don't see a specific one for a Series II. Is there a difference in them? |
Replies:
Posted By: DrAllis
Date Posted: 27 Aug 2024 at 8:02am
| The series 2 manifold has a threaded in 1 1/2" pipe for the muffler to slip over. I don't think a D-14 and an old D-15 are the same as the D-15 manifold hangs out wider from the cylinder head another inch over the D-14, but I could be wrong on that. I don't know where your crack actually is in the INTAKE portion of the manifold, but if the engine runs fine and especially idles fine, the crack isn't deep enough to hurt anything just yet. |
Posted By: RP Farms
Date Posted: 27 Aug 2024 at 11:38am
| As the tractor gets worked and warms up the crack opens just enough to have to run the choke. |
Posted By: steve(ill)
Date Posted: 27 Aug 2024 at 1:32pm
|
https://www.allischalmers.com/forum/d15-ii-exhaust-manifold_topic178452.html%20" rel="nofollow - https://www.allischalmers.com/forum/d15-ii-exhaust-manifold_topic178452.html
------------- Like them all, but love the "B"s. |
Posted By: RP Farms
Date Posted: 27 Aug 2024 at 1:55pm
Thank you! |
steve(ill) wrote: