AGCO Allis 5670
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202858
Printed Date: 25 Apr 2025 at 4:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AGCO Allis 5670
Posted By: Tech teacher
Subject: AGCO Allis 5670
Date Posted: 24 Aug 2024 at 8:59am
I bought a nice 5670 FWA with 4 brand new radial Firestones and 2230 hrs. So far so good! Starts and runs great, very minimal leak. Just got done replacing bulbs and fuses to get all lights working.
I noticed that in the 4 sp synchro, it seems 3rd gear barely engages. Guessing synchro wear and shifter linkage slack.
Anyone cracked one of those open?
Think it will be a winter project, collecting info so I'm ready for that project. Just using 1,2,4 for now ;)
Thanks all, great forum!
Nick in Wisconsin, USA
-------------
Nick
|
Replies:
Posted By: ranger43
Date Posted: 25 Aug 2024 at 7:37am
|
You can pull plate off the bottom of the trans. and see what exactly is going on before you consider splitting it. We sheared off the input shaft of the shifter and fortunately were able to have it repaired though that panel.
|
Posted By: Tech teacher
Date Posted: 24 Apr 2025 at 7:18pm
Thanks Ranger, sorry for taking so long, haven't been back in a while. Hoping to get that bottom plate pulled off this summer. Will report back. Gears 1,2 & 4 seem fine, have been using it last fall and this spring for some tillage. I just haven't been using 3rd gear. Hope not too serious. Was not a loader tractor, was used by a township for mowing ditches.
-------------
Nick
|
|