210 engine parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202678
Printed Date: 23 Nov 2024 at 11:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 210 engine parts
Posted By: acer
Subject: 210 engine parts
Date Posted: 12 Aug 2024 at 10:05am
|
My 210 has antifreeze in the oil pan, so in the near future I'm going into it and see what's the problem. any recommendations on engine kits or parts? the last overhaul on my 7060 I used Clevite brand but I bet that's not an option anymore. thanks
|
Replies:
Posted By: 8070nc
Date Posted: 12 Aug 2024 at 10:34am
No recomendation on engine kits but agco had clevites about a year ago
-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
Posted By: ryan(IN)
Date Posted: 12 Aug 2024 at 11:09am
Pretty much the only option for overhaul kits anymore is reliance. We a got a kit from Riley tractor at work awhile back but had reliance pistons and sleeves. Whatever kit you get I would buy an agco head gasket.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: Mikez
Date Posted: 13 Aug 2024 at 10:13pm
|
Ryan do you know what ac kit part number
|
Posted By: acer
Date Posted: 15 Aug 2024 at 12:08pm
|
Thanks for the info, suppose i will check the oil cooler first then move on to the next step.
|
Posted By: DrAllis
Date Posted: 15 Aug 2024 at 1:09pm
|
Jack up under the bellhousing. Roll the front axle out from underneath. Pull the pan. Pressurize the radiator. Plug in the block heater if it has one. Watch for the coolant to start leaking. Oil coolers are SELDOM the problem. Do not pressurize more than 12 psi.
|
|