Farm Equipment - 6080 thrust bearing adjustment

Print Page | Close Window

6080 thrust bearing adjustment

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202215
Printed Date: 23 Nov 2024 at 5:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 thrust bearing adjustment

Posted By: cowkicker
Subject: 6080 thrust bearing adjustment
Date Posted: 10 Jul 2024 at 10:36am

I am in need of info on shimming the thrust bearing that mounts on the front of a 6080 engine. Thanks

Replies:

Posted By: SteveM C/IL
Date Posted: 10 Jul 2024 at 1:50pm

Google will shed some light.....

Posted By: cowkicker
Date Posted: 10 Jul 2024 at 5:12pm

Thanks, but I was hoping for more info or a diect link. I am not good with computers and have slow internet too!

Posted By: DrAllis
Date Posted: 10 Jul 2024 at 5:28pm

Whenever I shimmed one I shot for .006" end play of the crankshaft. Shove the crank pulley to the rear as far as it will go with a prybar. Set your dial indicator at zero. Have someone step on the clutch pedal all the way and see what you've got.

Posted By: cowkicker
Date Posted: 10 Jul 2024 at 9:02pm

Thanks, that is what I was looking for!