D 10 RADIATOR SUPPORT??
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202171
Printed Date: 23 Nov 2024 at 7:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 10 RADIATOR SUPPORT??
Posted By: tractorboy
Subject: D 10 RADIATOR SUPPORT??
Date Posted: 07 Jul 2024 at 3:15pm
| Putting son's d-10 III engine back in I discovered there was no radiator support, from the paint marks seems whoever was in it last just bolted it to the front bolster weight . Is this a problem , or do I need to find one,thanks in advance , keith so.va. |
Replies:
Posted By: PaulB
Date Posted: 07 Jul 2024 at 3:34pm
|
Check The parts book: That's the way it is. The radiator for a series III is not the same as a series I & II. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Gary
Date Posted: 07 Jul 2024 at 3:34pm
|
For a Ser. III the Rad sits directly on the front Bolster. G |
Posted By: tractorboy
Date Posted: 07 Jul 2024 at 7:37pm
Thanks guys!! Enough money spent on the overhaul already !!
|