7050 pto
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202161
Printed Date: 23 Nov 2024 at 4:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7050 pto
Posted By: Jake79
Subject: 7050 pto
Date Posted: 07 Jul 2024 at 6:44am
| Hello all, looking at possibly purchasing this 7050 from a neighbor. From all the things I've read up on, this is 1000 rpm only? No possibility of getting 540 rpm? TIA |
Replies:
Posted By: DrAllis
Date Posted: 07 Jul 2024 at 7:00am
| 1000 RPM was STANDARD and 540/1000 was an OPTION. Could be either one. Look at it and know what you're looking at. |
Posted By: Jake79
Date Posted: 07 Jul 2024 at 7:07am
|
Posted By: Jake79
Date Posted: 07 Jul 2024 at 7:09am
|
Yes 1000 rpm only My baler is 540 that's why I'm interested in tractor. Never used a 1000/540 adapter. Thoughts? |
Posted By: DrAllis
Date Posted: 07 Jul 2024 at 7:25am
| I never liked another six inches of length on the PTO shaft being used when the tractor is expected to be turning alot while using the PTO. |
Posted By: Stan R
Date Posted: 07 Jul 2024 at 7:46am
| Notice the cracked pto casting retainer? Probably a non-issue but fyi. |
Posted By: Jake79
Date Posted: 07 Jul 2024 at 7:50am
|
Yes, I noticed the crack in it. Not sure if it would be an issue. It's been used a few yrs like this I'd say Lol |
Posted By: bigal121892
Date Posted: 07 Jul 2024 at 10:05am
|
I know it is possible, with used parts, to convert a 1000 RPM only shaft, to a 540/1000 on later 7000 series tractors. I don't know if that is possible on the 7050 or not. |
Posted By: DrAllis
Date Posted: 07 Jul 2024 at 11:05am
| Internal PTO parts can be harvested from any 7010 thru 7060 or 8010 thru 8050 and used in a 7050. It's not a one hr job to harvest the parts and certainly not an hr job to install the parts, but it can and has been done many times over the last 40 or more years. |
Posted By: Jake79
Date Posted: 07 Jul 2024 at 11:43am
| Appreciate it Dr. Besides the pto dilemma there are some other issues I've found. He's gonna have to take way less than 5k |
Posted By: nanuk
Date Posted: 27 Jul 2024 at 9:53pm
|
depending on the baler, you may be able to flip the gearbox to make it 1000 I have had John Deere round balers, and they all could go either way I think my old Vermeer could also best to check yours ------------- AC7060Pd 1975 |