??? Wide Swinging Draw Bar ???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202021
Printed Date: 02 Jul 2024 at 5:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ??? Wide Swinging Draw Bar ???
Posted By: Unit3
Subject: ??? Wide Swinging Draw Bar ???
Date Posted: 28 Jun 2024 at 3:53pm
Does anyone know if a wide swing draw bar can be put on a tractor that has a three-point hitch? I am wondering if one could be put on my 8050 and still leave the two-point arms in position. I know I can’t use the three-point I just wanna know, if there’s anything that would get in the way drawbar brackets .
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
Replies:
Posted By: DSeries4
Date Posted: 28 Jun 2024 at 9:23pm
On an 8000? No, you can't have both.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Unit3
Date Posted: 28 Jun 2024 at 9:41pm
Well, I know you would have to leave the three-point up. I know you couldn’t use it, but is there anything underneath where the white swing would bolt to that three-point? Parts would interfere with?
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
Posted By: DrAllis
Date Posted: 28 Jun 2024 at 10:49pm
|
I think if you dropped off the entire bail assembly and removed the rub blocks from each draft arm and left the draft arms fully UP, it might work.
|
Posted By: Unit3
Date Posted: 29 Jun 2024 at 4:06pm
That’s kind of what I was thinking. The thought is to put a hydraulic cylinder on the drawbar. That way I could push/pull the Planter hitch off to each side, depending if I’m going north or south through the field.
My landlord wants to cover crops and I’m trying to figure out a way to get my soybean row close to last year‘s Corn stock row. I make 3 Complete passes around the field and then I start working my way from one side to the other.
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
Posted By: DrAllis
Date Posted: 29 Jun 2024 at 5:04pm
|
If the draft arms are in the way, they drop off very easy compared to older A-C models. I can't imagine the torsion bar would be in the way.
|
|