Farm Equipment - 78 rake belt

Print Page | Close Window

78 rake belt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201952
Printed Date: 24 Nov 2024 at 2:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 78 rake belt

Posted By: im4racin
Subject: 78 rake belt
Date Posted: 23 Jun 2024 at 10:02pm

I don't have a parts book...does anyone have the pn for the drive belt on a 78 rake?

Replies:

Posted By: Mikez
Date Posted: 23 Jun 2024 at 10:12pm

547286

Posted By: im4racin
Date Posted: 24 Jun 2024 at 6:59am

Thanks much!

Posted By: orangereborn
Date Posted: 24 Jun 2024 at 8:26am

That should be a C137/141.....

Posted By: tbran
Date Posted: 27 Jun 2024 at 10:41am

Curious, the rake have been regulated to microfisch - were the AC rakes like the NI with shims in the pulleys to speed up or slow down reel speed. Can't remember and was ask the question. We sold a lot of belt drive NI rakes. They were all shipped in the high speed shimmed position which was too fast for heavy hay. We always added shims in the basket drive or axle pulley and took the shims out of the reel sheave. Then instruced every one when transporting to back off the tensioner 4 turns to avoid wearing out the drive hub in road transportation.

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: im4racin
Date Posted: 27 Jun 2024 at 11:30am

Yes they have shims on both the drive and driven pulleys

Posted By: darrel in ND
Date Posted: 28 Jun 2024 at 6:34am

Allis drive hubs must have been the same too, needing the springs to be backed off for road transport. Which must have never been done, and would explain why the drive hubs have been worn out on every one I've seen.
Darrel