Shops, Barns, Varmints, and Trucks - Anyone familiar with B&S Electric Power Washer ?

Print Page | Close Window

Anyone familiar with B&S Electric Power Washer ?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201885
Printed Date: 22 Nov 2024 at 11:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Anyone familiar with B&S Electric Power Washer ?

Posted By: BuckSkin
Subject: Anyone familiar with B&S Electric Power Washer ?
Date Posted: 20 Jun 2024 at 4:38am

I have a Briggs & Stratton electric power washer that has served me well for years.

Model #020358-00

I would like to have a set of those accessory nozzles that turn 30°, 90° and 130°

As best I can determine, I would also need a different "gun" that accepts them; is that correct ?

My "gun" and the nozzles that attach to it sort of push in and twist; the nozzles have two "wings" that engage slots in the gun and twist to lock in place.

I would also like to do away with that stupid safety button that must be pressed to pull the trigger; it is highly annoying and very hard to press.

Replies:

Posted By: jaybmiller
Date Posted: 20 Jun 2024 at 7:09am

hmm, you may be able to take the handle apart and remove the safety button.

I did that for both my Ryobli recip saws. Hardest part was FINDING a screw that fell onto the garage floor......

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Codger
Date Posted: 20 Jun 2024 at 7:28am

Nozzles and couplers are readily available at the home centers or even wal-mart. Valley Industries has complete guns available for easy swap out of the originals. Check Amazon, ebay, and such.

-------------
That's All Folks!