Marvel carb
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201861
Printed Date: 24 Nov 2024 at 12:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Marvel carb
Posted By: oldfords
Subject: Marvel carb
Date Posted: 18 Jun 2024 at 8:57am
| Where can I get new packing for the load adjustment screw on my D17 tractor? The screw leaks a little and will not stay tight, I tried tightening the nut, but still the same problem. |
Replies:
Posted By: steve(ill)
Date Posted: 18 Jun 2024 at 9:59am
i would guess you carb model is a 773 on the D17 .... There are "small kits" (gaskets) and "larger kits" that would contain more brass or steel parts.... i would THINK that anything you needed would be in that kit.. ------------- Like them all, but love the "B"s. |
Posted By: Steve in NJ
Date Posted: 18 Jun 2024 at 10:03am
|
Well, if its a Marvel, it should be a TSX-773,869 , or 871. I would check to make sure its the correct Carb first. Sometimes over the years, Tractors get different Carbs put on them unless its been in the family since day one and you know it hasn't been changed. I carry some in stock. Find out the Carb # first and we can go from there.... Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: ac45dave
Date Posted: 18 Jun 2024 at 11:10am
|
I don't know why they don't put these in the kits.I have yet to find a kit that includes them.Seems pretty silly to me.Here's where I found them.Roberts carburetor repair.It's #34 in the pic.scroll down the page to see it.Although your carb number isn't in this list,this packing does fit your application.The carbs listed on this page are large bowl marvels as is the carb used on D17 so most of the parts interchange.I bought a half dozen or so when I found them as I have several old A/Cs around here.Hope this helps you out. http://robertscarbrepair.com/carburetor-parts/marvel-schebler-tsx-m-40-320-330-420-430-440/" rel="nofollow - http://robertscarbrepair.com/carburetor-parts/marvel-schebler-tsx-m-40-320-330-420-430-440/ ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: steve(ill)
Date Posted: 18 Jun 2024 at 1:11pm
|
Not included in the kits ?? Man, somebody screwed up there... So its similar to the fuel bowl shutoff valve on the gas tank.... Maybe wrap a few rows of teflon floss around the shaft and reinstall the nut ?? ------------- Like them all, but love the "B"s. |
Posted By: Steve in NJ
Date Posted: 19 Jun 2024 at 11:22am
|
They were never put in kits because they are considered a "service part" not a rebuild part. That's in the same category as floats, venturi's and nozzles. Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |