Farm Equipment - CA ross steering hear

Print Page | Close Window

CA ross steering hear

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201713
Printed Date: 24 Nov 2024 at 3:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA ross steering hear

Posted By: Dakota Dave
Subject: CA ross steering hear
Date Posted: 09 Jun 2024 at 12:07pm

My CA steering box the sprial gear brpke a tooth. I bought a suposed CA box its not has only one follower and the steering arm is smaller spline wound up putting a short arm steering arm on now I can mow but the steering is very limited. Is there any place that has a replacement spiral gear.

Replies:

Posted By: PaulB
Date Posted: 09 Jun 2024 at 7:26pm

I believe that someone sold you a steering box for a C not a CA. The CA box has two following pins on the cross shaft. If you were close enough to come to my place I probably have part to get you back together. Shipping long oversize parts can get costly. I'm in Maryland.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Dakota Dave
Date Posted: 10 Jun 2024 at 12:45pm

ya I know its a C part. I got from E bay no return and shipping was alot. was used part with CA wrot on the tag as soon as I recived it I was bummed its in great shape came from a closed shop. it kinda work with the short arm another bad purchase cant tell from photos and no part #s just really limits the steering angle. I'm in North Dakota. I try'ed locally but Allis Chalmers didn't sell well out here. No small tractors of any kind. We use a IH 1086 as a yard tractor. its to small for anything esle.

Posted By: Dakota Dave
Date Posted: 10 Jun 2024 at 12:52pm

I have the spirial gear removed and taking to a machinest later this week hes out of town but don't have much hope of getting it fixed. If I could buy the correct one shipping cost is doable. Ill post a picture soon.

Posted By: steve(ill)
Date Posted: 10 Jun 2024 at 1:00pm

Dave... how about cutting the short arm and extending it a few inches ( cut and weld).. Then leave the C box on the tractor while you search for the CA gear ? ... C box might last quite a while if all your doing is mowing.

-------------
Like them all, but love the "B"s.

Posted By: Dakota Dave
Date Posted: 10 Jun 2024 at 2:53pm

I've thought of
Doing that when I catch up with the grass. Right now I'm mowing a couple times a week. While the CA was down I was using a WD45 with a 3pt mower I'm just happy to get back on the CA. Mowing is all it ever does so it'll work.

Posted By: steve(ill)
Date Posted: 10 Jun 2024 at 9:57pm

DAVE !!!

https://www.allischalmers.com/forum/fresh-salvage_topic200370.html" rel="nofollow - https://www.allischalmers.com/forum/fresh-salvage_topic200370.html

-------------
Like them all, but love the "B"s.

Posted By: Dakota Dave
Date Posted: 11 Jun 2024 at 10:46am

Thanks I replyed to it.