Construction and other equipment - For those contemplating

Print Page | Close Window

For those contemplating

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201702
Printed Date: 26 Nov 2024 at 9:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: For those contemplating

Posted By: DMiller
Subject: For those contemplating
Date Posted: 08 Jun 2024 at 6:39am

Any future buys of machines outside of AC for dozers or loaders.

Been running a later Deere 755k, ran a 755 G some time back and Deere has not corrected any concerns on these. Sluggish, poor responses, hard to keep adjustments on straight tracking consistent.
Ran this latest one, have to continually move right hand from loader control to electronics panel, waste of efforts as need four hands.

Cats newer 953 and 963 series are near as bad and the CTLs are far worse. Personally will stick with anything Pre 2000, except manufacturers are eliminating repair parts, as usual.

Replies:

Posted By: orangeman
Date Posted: 08 Jun 2024 at 12:30pm

Always helpful to gain others insights on these "other" machines so thanks for posting! ~ Orangeman

Posted By: DMiller
Date Posted: 08 Jun 2024 at 1:11pm

One of biggest concerns of Deere units, As Crowd Hydraulics for Loader or Dozer, even Ripper or a Add On drag scraper(750 series) the Track Motors suffer from starvation, get to jumping and bucking thru the rails, and repeats as continue up since the G Series units.

Cat only improved Drive Hydro units by making the systems almost non repairable.

Posted By: truckerfarmer
Date Posted: 08 Jun 2024 at 9:40pm

We have an 850L with 6-way blade at work and we love it. Little over 1000 hrs on it and not 1 problem.

-------------
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer

Duct tape.... Can't fix stupidity. But will muffle the sound of it!

Posted By: DMiller
Date Posted: 09 Jun 2024 at 5:30pm

850 is sized enough not to see these type issues

Posted By: DougG
Date Posted: 09 Jun 2024 at 5:46pm

Yup see these issues on machines at work - electric controled hydraulics,, move the lever nothing then- pow -it works - sometimes it not in a good place