Garden Tractors - Lift cylinder for d10

Print Page | Close Window

Lift cylinder for d10

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201642
Printed Date: 22 Nov 2024 at 4:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Lift cylinder for d10

Posted By: Hglover
Subject: Lift cylinder for d10
Date Posted: 04 Jun 2024 at 12:41am

Looking for lift cylinder for d10

Replies:

Posted By: PaulB
Date Posted: 04 Jun 2024 at 10:35am

There are 2 different sizes of D10 lift cylinders depending on hydraulic pump is on the tractor. The tractors with the CA style pump on the side of the PTO unit (Series I) used the same cylinder as a CA does. Then there was an engine mounted pump which uses a larger bore cylinder same as the High mounted PTO pump that the Series II & III tractors had.

What series D10 tractor are you wanting the cylinder for? You may get a better response posting in the Classified section.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY