Allis Wd 3pt Hold Function
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201633
Printed Date: 24 Nov 2024 at 4:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Wd 3pt Hold Function
Posted By: ForgivenCreation
Subject: Allis Wd 3pt Hold Function
Date Posted: 03 Jun 2024 at 3:38pm
|
Does the allis wd have a hold position for the 3 point. Was trying to use the no5 mower and it was either going up or down. I read on an older post that this has to do with the 3 point hold function?  
|
Replies:
Posted By: PaulB
Date Posted: 03 Jun 2024 at 4:18pm
|
Yes it does. The Operators manual does a great job of explaining just how all the screws are to be set for different hydraulic functions. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DrAllis
Date Posted: 03 Jun 2024 at 5:38pm
| When the linkage is adjusted and set-up properly for "HOLD" position work, the hydraulic lever will have a detent at about the half-way point on the quadrant. There is a large decal on the battery box side that tells you what to do to get the HOLD position working as does the Operators manual. |
Posted By: SteveM C/IL
Date Posted: 04 Jun 2024 at 9:55am
| ....and most leak off as you use it so it's not like you can set and forget. It is NOT like a depth control on a real 3 point. |