1400 Chiselvator winglock parts?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201413
Printed Date: 24 Nov 2024 at 9:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1400 Chiselvator winglock parts?
Posted By: Lonn
Subject: 1400 Chiselvator winglock parts?
Date Posted: 20 May 2024 at 1:12pm
|
AGCO on-line parts book doesn't show a thing about those eccentric locks. Dealer can't find it either. Zero information! My 1400 is a 26 foot green Deutz Allis. Anybody know something about how to look up those parts? ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Replies:
Posted By: 8070nc
Date Posted: 20 May 2024 at 2:17pm
|
Ive got one just like it. I havent seen any excentrics around the wings. Id be interested to see what tjey are myself ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: ryan(IN)
Date Posted: 20 May 2024 at 2:30pm
|
Hmmm….there isn’t anything about them in the online parts book. I know exactly what you are talking about. Might have to look on the fiche at work and see if it shows them. ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: PaulB
Date Posted: 20 May 2024 at 7:09pm
|
how about posting a picture of what you're looking for? I have some NOS part I can't identify, I just know they don't fit anything I have so..... ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Lonn
Date Posted: 20 May 2024 at 9:53pm
Okay I'll post a couple pics. I don't necessarily need the eccentrics but the 2 plates on each side of the eccentrics. [IMG]------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 20 May 2024 at 10:00pm
|
It's the plates or flat irons with the yellow decals. This pic show the right hand side My left side ones are destroyed. There are 2 plates on each side. The eccentrics are between the plates which you can just see the top of. I don't need the eccentrics, just the plates. If they are too expensive then I'll get the neighbor to make them with his robot plasma cutter. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Mikez
Date Posted: 21 May 2024 at 6:25am
| Does the allis chalmers 1400 have these brackets. |
Posted By: DrAllis
Date Posted: 21 May 2024 at 6:29am
| Only the 1400 ChiselVator has these. |
Posted By: 8070nc
Date Posted: 21 May 2024 at 8:05am
|
Mine is just like that except it doesnt have the eccentrics. My right side is messed up and wont hold the wing up. I gave 800.00 dollars for it sight unseen. When it got here it had a 4 times too heavy rolling basket mess on it that had broken the transport axel. Back to the wings,if they had built them to fold over center there wouldnt bee any need for those wing catches ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: Lonn
Date Posted: 21 May 2024 at 11:05am
|
I agree. The wings do go over center but only ever so slightly. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 22 May 2024 at 8:54am
|
Ryan, were you able to find anything out? ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |