Disc harrow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200766
Printed Date: 01 Dec 2024 at 4:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Disc harrow
Posted By: ACinSC
Subject: Disc harrow
Date Posted: 07 Apr 2024 at 2:02pm
| Mine has no disc scrapers like some. I just knock the dirt/clay buildup off . Guess that's about all I can do?? Any other ideas? Thanks |
Replies:
Posted By: Daehler
Date Posted: 07 Apr 2024 at 4:11pm
|
What model do you have? ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: ACinSC
Date Posted: 07 Apr 2024 at 4:14pm
| Sorry, it's not an Allis disc harrow. Can't remember the name brand. Thanks |
Posted By: Lars(wi)
Date Posted: 07 Apr 2024 at 4:52pm
|
Wait until the soil is dryer? Are the disk’s ‘straight cut’ or is the disk gang angled? Maybe change angle? ------------- I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science. |
Posted By: DiyDave
Date Posted: 07 Apr 2024 at 4:56pm
Loop of barbed wire from the axle to the frame, wherever there ain't a bearing in the way... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: ACinSC
Date Posted: 07 Apr 2024 at 5:00pm
| Thanks guys, I think Lars hit the nail on the head. Our place is mostly sand and it seems to disc better when it's kinda wet. |
Posted By: Ray54
Date Posted: 07 Apr 2024 at 8:31pm
|
All kinds of ways to skin this critter. Just depends how bad you want to do it. 1 Use barbwire as suggested. 2 Old roller chain works well last a lot longer than wire. 3 Advertise for scrapers that fit you model disc. 4 Beg, borrow, or buy steel and start building. I have built scrapers not all that hard. Without scraper on my disces I would never get anything done most years. |
Posted By: ACinSC
Date Posted: 07 Apr 2024 at 9:12pm
| Thanks Dave and Ray! Wire or chain sounds doable. |
Posted By: Tbone95
Date Posted: 08 Apr 2024 at 6:39am
| I used some flat chain for a while. Yeah, it doesn’t scrape right into the concave but prevents the whole space from clogging up, works pretty well. |
Posted By: victoryallis
Date Posted: 08 Apr 2024 at 6:48am
|
Buy disc with scrapers and sell current disc. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: ACinSC
Date Posted: 08 Apr 2024 at 8:14am
| Thanks guys for the suggestions! |