G Allis pistons
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200757
Printed Date: 01 Dec 2024 at 4:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G Allis pistons
Posted By: Glen S.C.
Subject: G Allis pistons
Date Posted: 06 Apr 2024 at 9:19pm
|
I am in the middle of a engine rebuild on my dads G. Have been able to locate all of the parts needed except the pistons. The machine shop says we need 40 over pistons and rings. if anyone has an outlet for these please let me know. Can find std 10 20 30 60 . Just didn't want to do 60 if we don't have to.
|
Replies:
Posted By: SteveM C/IL
Date Posted: 06 Apr 2024 at 10:56pm
|
I'd go 60 and be done. It will out last you. Let the next guy worry about it. I wish you well.
|
Posted By: wjohn
Date Posted: 07 Apr 2024 at 8:13am
I am getting plenty of hits searching online, but I don't know for sure if they're in physically stock everywhere. Try searching for "Continental N62 .040 pistons" since that is the engine that was used in the G.
-------------
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
Posted By: Mikez
Date Posted: 07 Apr 2024 at 8:49am
|
Think we only have two pistons
|
Posted By: Pfouts Family Farm
Date Posted: 08 Apr 2024 at 9:42am
Out of stock at the moment. I do know they are on order with several places, one of which said they were 2-3 months out. Dont know what your timeline is like but if you are going with .040 pistons thats probably what you are lookling at for lead time unless you can find a set sitting around somewhere.
|
Posted By: Mikez
Date Posted: 08 Apr 2024 at 10:41am
|
Only have two 800847 available
|
Posted By: steve fischer
Date Posted: 08 Apr 2024 at 12:21pm
|
I think I have a new set with rings in .040 will check thanks 507-7six6-0551
|
Posted By: Glen S.C.
Date Posted: 13 Apr 2024 at 9:24pm
|
Thanks guys . Everyone I talked to says out of stock. 2 to 3 months as mentioned. Shop says he is going to rough bore it and maybe able to use 30's .
|
|