Farm Equipment - 6060 spindles

Print Page | Close Window

6060 spindles

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200674
Printed Date: 13 Nov 2024 at 2:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6060 spindles

Posted By: Rafterg
Subject: 6060 spindles
Date Posted: 02 Apr 2024 at 2:14pm

Anyone have a source of heavier spindles for a 6060. Just broke my 3 spindle on the right side in two years.

Replies:

Posted By: DSeries4
Date Posted: 02 Apr 2024 at 3:17pm

What are you lifting???

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: AC7060IL
Date Posted: 02 Apr 2024 at 4:23pm

Rafterg, I don’t own a 6000 series tractor. So I’ll ask this question. Does your 6060’s steer cylinder push directly into its right spindle & then that spindle pivots its turning forces into a tie-rod which in turn pushes left spindle? If yes, then try relocating steer cylinder so it pushes directly into tie-rod; thus minimizing ALL its forces (energy) into the right spindle and somewhat equalizing its force between both spindles.

Posted By: DrAllis
Date Posted: 02 Apr 2024 at 5:59pm

Loader tractor I assume ??? Run less air in your front tires and drive slower. There are no "heavier" spindles available.