Farm Equipment - Need a way.... 220 AC

Print Page | Close Window

Need a way.... 220 AC

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200540
Printed Date: 08 May 2024 at 3:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need a way.... 220 AC

Posted By: tbran
Subject: Need a way.... 220 AC
Date Posted: 26 Mar 2024 at 2:47pm

...to put 10 bolt pressed steel wheels (off an L3) on a 220 - AC 3 5/8" axles.

Have 3 3/4" hubs and many OEM wedges / wheels. Need a way to install 30.5 x 32's on the 220. Have one MexHat center as well if anyone interested or has an extra. Was able to put 24.5-32 on our D21 by using 3.25" MF (ok, best I could do) swedge hubs.

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Replies:

Posted By: Darb210
Date Posted: 26 Mar 2024 at 5:58pm

I have a single mex hat cast center, the large one that mounts to the 38" rim

Posted By: Unit3
Date Posted: 26 Mar 2024 at 9:30pm

I sent a private message to each of you. Mexican hats are no good as a singles.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Posted By: DrAllis
Date Posted: 27 Mar 2024 at 6:38am

I think there is a Deere tractor axle that they call 92 MM that is very close to 3 5/8".

Posted By: tbran
Date Posted: 27 Mar 2024 at 11:00am

Yup, Doc, just found a set - 92MM- 3 5/8 the guy won't sell..grrr - will keep looking..

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: injpumpEd
Date Posted: 27 Mar 2024 at 1:32pm

CAP Bros hubs, he has 9/10 bolt hubs, but they are more expensive than plain old dual hubs. I'm running a set on my 210 TooHotToFarm. The nice thing is they are narrow, so it lets you have more freedom of placement on the axle.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: SteveM C/IL
Date Posted: 27 Mar 2024 at 11:44pm

Are you trying to stay away from cast centers? I've got 30.5's on my 220 but that's with 32in centers. Was original with 24.5's and I came close to putting those 92mm Deere centers on and going to 38in rubber.

Posted By: tbran
Date Posted: 28 Mar 2024 at 11:38am

You seen the prices on OEM 32" centers / rims :-) I have one 210 with 24.5/32 's

-------------
When told "it's not the money,it's the principle", remember, it's always the money..