Allis 645 brake drum
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200187
Printed Date: 23 Nov 2024 at 7:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis 645 brake drum
Posted By: darrel in ND
Subject: Allis 645 brake drum
Date Posted: 08 Mar 2024 at 5:56am
|
Probably will put this in the classifieds as well, but would anyone have a brake drum for a 645 allis payloader? I am not sure why, but my parts machine has disc brakes on it. Were discs used prior to drums, after, or could have it been upgraded later in it's life to discs? I am not 100 percent sure but I think my parts machine is the older of the two, but previous owner covered up the serial number plate with some dynamat or something that doesn't want to come off. Thanks, Darrel |
Replies:
Posted By: im4racin
Date Posted: 08 Mar 2024 at 6:06am
| I think the parts machine was the newest |
Posted By: Mikez
Date Posted: 08 Mar 2024 at 7:02am
| What’s the part number for brake drum |
Posted By: darrel in ND
Date Posted: 08 Mar 2024 at 10:51am
|
Hopefully there is a parts book in my manual binder for the machine. Otherwise, I am not sure where I can find the parts number. I will try to find it this weekend. Thanks Darrel |
Posted By: darrel in ND
Date Posted: 08 Mar 2024 at 2:20pm
|
Ok, Mike. Here's a number for you to try. 73059735 Thanks, Darrel |
Posted By: steve(ill)
Date Posted: 08 Mar 2024 at 4:36pm
------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 08 Mar 2024 at 4:40pm
------------- Like them all, but love the "B"s. |
Posted By: darrel in ND
Date Posted: 09 Mar 2024 at 8:31am
|
Thanks for those leads, Steve. Appreciate it! Darrel |
Posted By: Mikez
Date Posted: 09 Mar 2024 at 8:50am
| Sorry Darrel that number didn’t show for me. But looks like have a few options above. Good luck |
Posted By: darrel in ND
Date Posted: 09 Mar 2024 at 2:21pm
|
Thanks for looking, Mike. Darrel |