Farm Equipment - 7020 Rear Rim problem

Print Page | Close Window

7020 Rear Rim problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200125
Printed Date: 13 Nov 2024 at 3:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7020 Rear Rim problem

Posted By: CDN 400
Subject: 7020 Rear Rim problem
Date Posted: 05 Mar 2024 at 9:10am

I'm going from 20.8's to 18.4's and went with used 16" rims off a Oliver 1855 but the problem is only 2 rim lugs will line up and the ops manual says to line up at least 3. I always thought most double bevel rims were the same.

Replies:

Posted By: IBWD MIke
Date Posted: 05 Mar 2024 at 9:31am

When I bought the 20.8's for my 856 last fall, tire dealer talked about this with me. I believe there is a 7 lug rim and a 9 lug rim. I'm sketchy on the details and I dodged that particular bullet. The 18" rims I bought match the wheel centers. He mentioned something about needing three lugs to line up. The man has been in the tire business a very long time, when he talks about stuff like this, I pay attention.

Posted By: DrAllis
Date Posted: 05 Mar 2024 at 10:33am

We ran a 400 HP D21 farm stock puller with only two holding for years. A 7020?? keep them tight and I don't think they will ever bother.

Posted By: CDN 400
Date Posted: 05 Mar 2024 at 12:03pm

Thank you for the replies. We'll get them straight and tight and run it. I apologize for all the dumb questions and there will probably be more but I prefer to do things once .