8050 PD transmission issues
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199795
Printed Date: 26 Jun 2024 at 12:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8050 PD transmission issues
Posted By: youngorange2000
Subject: 8050 PD transmission issues
Date Posted: 12 Feb 2024 at 7:19pm
| I have a 8050 PD that runs flawless however the transmission is acting up. It will not move in reverse, has a horrible grinding noise when range lever is in park or neutral. Also when shifting the tractor will not go into gears 2-5 without putting the range lever in neutral. The trash pressure light stayed on the whole time the tractor was running. I only ran the tractor for 5 minutes. Where should I start? Thanks |
Replies:
Posted By: youngorange2000
Date Posted: 12 Feb 2024 at 7:21pm
| Previous owner said it worked great until the hired help got it stuck while disking. The tractor was then driven to the edge of the field and parked. |
Posted By: DrAllis
Date Posted: 12 Feb 2024 at 9:17pm
| Sounds like getting it stuck and ramming it back and forth has destroyed something. Remove floor of cab and shift cover to see what the damage is. |
Posted By: youngorange2000
Date Posted: 21 Feb 2024 at 7:26pm
|
Posted By: youngorange2000
Date Posted: 21 Feb 2024 at 7:27pm
| Looks like all my reverse gears are toast. |
Posted By: Lynn Marshall
Date Posted: 21 Feb 2024 at 11:22pm
| That's a big 10-4. You guys are rewriting the book on destroying machines that I thought were nearly indestructible. Ring gear busted on a 7045 and now reverse gear failure on an 8050. This is another very odd failure. Sorry for your bad luck and another pretty big job to tackle. Used parts shouldn't be a problem with such a rare problem. |
Posted By: NEVER green
Date Posted: 22 Feb 2024 at 7:54am
|
I have those gears out already from a 7060, I am also in Minnescrotum. ------------- 2-8050 1-7080 6080 D-19 modelE & A 7040 R50 |
Posted By: youngorange2000
Date Posted: 22 Feb 2024 at 3:01pm
| Do they interchange? |
Posted By: youngorange2000
Date Posted: 22 Feb 2024 at 3:47pm
| Doing some digging on agco parts books. The gears do interchange between a 7060 and 8050 PD transmission |