Pulling Forum - BE/CE block enhanced output pulling engines

Print Page | Close Window

BE/CE block enhanced output pulling engines

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199667
Printed Date: 10 May 2024 at 12:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: BE/CE block enhanced output pulling engines

Posted By: PaulB
Subject: BE/CE block enhanced output pulling engines
Date Posted: 05 Feb 2024 at 6:27pm

As I've been cleaning up, I've found I have many parts to build a few Higher HP BE/CE engines. I can build 30HP for a little more than a standard rebuild and could build one to be in the 60 HP range. I could build something anywhere in between depending on the customers wants. I could take on consignments for these on a very limited basis.

I pulled a CA tractor for about 40 years with an unbeatable record of wins. So much that the 2500 pound class around me dried up as that number of entries got so low because others that were pulling in my class quit because they could never win against me. I have never had any engine that I've built fail.

For those seriously interested you could send a direct email to; the1orangewizard@gmail.com

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY

Replies:

Posted By: PaulB
Date Posted: 09 May 2024 at 8:13pm

I've been working on enhanced power from the BE/CE block for more that 40 years. I've developed a few tweaks that allow for highly increased power while retaining durability. Of all the engines I built over the years, not one has had a failure.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY