Allis 7000 water pump
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199062
Printed Date: 14 Nov 2024 at 9:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis 7000 water pump
Posted By: Fireman216
Subject: Allis 7000 water pump
Date Posted: 05 Jan 2024 at 11:53am
|
Can someone help me, I have a 649t motor that the water pump is weeping out the hole. I can not find this pump anywhere! Every pump I find for a 7000 doesn't have the hose port molded into it. They all come with a threaded hole where the port is supposed to be. Is there an adapter available now? The hose that slides onto the port is 1" 1/2 and the new pumps have a 3/4 threaded hole.the casting # on my pump is 4035281 04. There is one on eBay but has a different fan mount, not as deep. And the casting # is different. Any help is appreciated!! If the pic doesn't load in a few minutes I will do it again
|
Replies:
Posted By: 8070nc
Date Posted: 05 Jan 2024 at 2:13pm
Id try Sandy Lake implement or schmidt and sons
-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
Posted By: automaticdave
Date Posted: 05 Jan 2024 at 5:26pm
|
I have a 7000 engine sitting on my shop floor with a Hi-Capacity reman pump on it and it has reducer screwed into that 3/4" port but large on the other end to accept the big hose. Must of came with the pump. Good luck Dave
|
Posted By: Lynn Marshall
Date Posted: 05 Jan 2024 at 7:49pm
|
The Hy-Capacity pumps come with two different sized hose bib fittings and a plug, so that it will fit several models.
|
Posted By: Fireman216
Date Posted: 06 Jan 2024 at 10:27am
|
Awesome! Thanks for the info everyone! I will look at that pump now. I was at a dead end in my brain!
|
Posted By: Fireman216
Date Posted: 06 Jan 2024 at 10:53am
|
Got one ordered!! Thanks again all!!
|
|