8070 door handle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198994
Printed Date: 14 Nov 2024 at 9:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8070 door handle
Posted By: aaronac1
Subject: 8070 door handle
Date Posted: 01 Jan 2024 at 10:48am
|
Hey guys, long time no post. I broke my pull handle on my 8070 and the dealer says they are discontinued. Is there someone else that handles them or does someone have a spare? Thanks, Aaron ------------- Wd-45 D-17s4 170 185 190xt 7045 8070 |
Replies:
Posted By: Mikez
Date Posted: 01 Jan 2024 at 10:52am
| Inside handle. There’s been other conversations on this. Maybe someone will post the links to them. 80s Chevy trucks I think are close |
Posted By: 55allis
Date Posted: 01 Jan 2024 at 11:54am
|
Try a local salvage yard… Seems a lot of those tractors went there…  ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD45 |
Posted By: Ron(AB)
Date Posted: 01 Jan 2024 at 2:08pm
|
Or put on a 7000 series handle. They never break! ------------- 405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk |
Posted By: aaronac1
Date Posted: 01 Jan 2024 at 5:13pm
|
Let me clarify... its the inside pull handle ------------- Wd-45 D-17s4 170 185 190xt 7045 8070 |
Posted By: DrAllis
Date Posted: 01 Jan 2024 at 5:40pm
| The original "belt" style was DQ'd 30 yrs ago for a steel pull bar. I'd think a leather strap would be easy to fabricate. |
Posted By: 8070nc
Date Posted: 01 Jan 2024 at 6:04pm
|
The pull strap from a 73-87 chevy pickup is a pretty close match. They can be dyed with SEM plastic paint. LMC Truck. USA1. Brothers Trucks. One of those should have them. Change both doors and nobody will know the difference. Of course a leather strap will work too according to your preference ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: SteveM C/IL
Date Posted: 01 Jan 2024 at 8:56pm
| one of mine has the metal rod pull bar....it seems just fine |
Posted By: Lynn Marshall
Date Posted: 01 Jan 2024 at 8:57pm
| I have moved a couple of door handles from the right door to the left door. That's the side that gets the most use in my area and rarely is the right door ever used. You can always fabricate something for the right side then. |
Posted By: Mikez
Date Posted: 02 Jan 2024 at 8:47am
Like 8070 said. From classic industry’s catalog |
Posted By: lentsch
Date Posted: 02 Jan 2024 at 7:13pm
|
Would a piece of baler belt be too 'redneck'? ------------- WD,D15,190XT,7000,8010x2,7060,8070 |
Posted By: 8070nc
Date Posted: 02 Jan 2024 at 9:14pm
|
Dont matter. Whatever you are happy with and gets the job done ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |