fiat allis 10c dozer
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198611
Printed Date: 23 Nov 2024 at 11:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: fiat allis 10c dozer
Posted By: DoubleFarms
Subject: fiat allis 10c dozer
Date Posted: 08 Dec 2023 at 4:51pm
| I have a fiatallis 10c dozer, looking for the push button start switch on the dash, has 3 wires going to it, any body have a part no. for the switch. Thank You |
Replies:
Posted By: steve(ill)
Date Posted: 08 Dec 2023 at 6:23pm
|
John Deere used a 3 terminal start switch on some older gas tractors... The third terminal supplied power to the coil ( around the RUN resistor) for startup... After starting, the coil was supplied power thru the resistor at a reduced voltage... IM not sure what a 3 terminal switch would do on a diesel... Power to "something" only when cranking, then off .. Steiner Tractor.....  ------------- Like them all, but love the "B"s. |
Posted By: Codger
Date Posted: 08 Dec 2023 at 6:30pm
|
Many of those old tractors had an insulated, (non grounded) magnetic switche to engage the starter. One applied both power, and ground to the switch. I've seen this more on Dyer type drives than Bendix types however. ------------- That's All Folks! |