Print Page | Close Window

D15 Rear Weights

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198521
Printed Date: 14 Nov 2024 at 8:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D15 Rear Weights
Posted By: Dave (NE)
Subject: D15 Rear Weights
Date Posted: 02 Dec 2023 at 8:48pm
Another weight question.  I have the AM 2798-10 Allis weights that fit on the 28" WD/WD45 wheels.  Will these rear weights also go on the D15 26" rear wheel?  Only ones I have seen on the D15/D14 wheels were the 4 sectional weights.  Thanks, Dave

-------------
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.



Replies:
Posted By: DiyDave
Date Posted: 03 Dec 2023 at 4:34am
Pretty sure they won't. center disc diameter thing. If I'm wrong, others eill chime in, with gusto...Wink

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: ac160
Date Posted: 04 Dec 2023 at 7:00am
I can't say for sure, but I would guess possibly not.   You can use ca weights though.


Posted By: Kenny L.
Date Posted: 04 Dec 2023 at 1:50pm
Well Dave there's one way to fine out, you can try to mount them but if I remember when I try I smashed a finger, and the weight don't ever get put on.



Posted By: EmieJast
Date Posted: 12 Dec 2023 at 6:19am
Thanks for the advice. I also have a question, can i ask it here, or i have to start a new thread? Navigating the challenges of graduate essay writing becomes a smooth journey with https://www.topessaywriting.org/graduate-essay-writing-service" rel="nofollow - https://www.topessaywriting.org/graduate-essay-writing-service The 'Graduate Essay Writing Service' section reflects the platform's commitment to academic excellence. Entrusting them with my essays has consistently yielded outstanding results.


Posted By: Dave (NE)
Date Posted: 12 Dec 2023 at 7:58am
Well the bolt holes matched up on the D15, but the weight covers the eccentrics, so cannot readily adjust the wheel in or out.

-------------
Do not argue with an idiot. He will drag you down to his level and beat you with experience. Mark Twain.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net