Farm Equipment - 6080 3 point hitch lift arm leaking.

Print Page | Close Window

6080 3 point hitch lift arm leaking.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=198024
Printed Date: 25 Sep 2024 at 5:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 3 point hitch lift arm leaking.

Posted By: ssefick
Subject: 6080 3 point hitch lift arm leaking.
Date Posted: 01 Nov 2023 at 9:24pm

This seems pretty straight forward. Loosen cap screw, remove remove arm, pull thrust spacer, pull old lip seal, install new lip seal, spacer, and torque to 108 ft/lbs.

Do I need to drain hydraulic fluid?

Anything I am missing or need to check while I am in there?

Thanks!

Replies:

Posted By: IBWD MIke
Date Posted: 02 Nov 2023 at 8:00am

Don't know the answer but will be watching. Mine don't leak but it never hurts to know these things when something pops up!

Posted By: ssefick
Date Posted: 02 Nov 2023 at 8:46am

Yes sir! Learning as I go!

With the help of all these nice folks!

Posted By: Mikez
Date Posted: 02 Nov 2023 at 10:47pm

Which ram does your 6080 have

Posted By: ssefick
Date Posted: 03 Nov 2023 at 6:21am

Mike, how do I find that out? Sn: 60803097.