Farm Equipment - 5030 no fuel at hp outlets

Print Page | Close Window

5030 no fuel at hp outlets

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197588
Printed Date: 25 Sep 2024 at 1:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 5030 no fuel at hp outlets

Posted By: Dean(IA)
Subject: 5030 no fuel at hp outlets
Date Posted: 07 Oct 2023 at 3:49pm

I ran my 5030 out of diesel fuel and it has set for awhile. I have fuel at the inlet gallery but no fuel at the hp outlets. Is the fuel control rack stick?

-------------
Dean(IA)

Replies:

Posted By: injpumpEd
Date Posted: 08 Oct 2023 at 1:39pm

Those are very hard to get the air bled, no transfer pump on them. I ran one of my 5020's out too, and I ended up blowing air by air tank carefully with bleeder open, and lines loose at nozzles. I was able to get fuel at nozzles, but it still was stubborn, so tightened lines and bleeder. I would then start it and hurry up and blow air in while it was chugging and coughing. Took me a while to get it fully bled. These compacts inject such small amounts of fuel, it takes forever to get fuel up to the injectors. Good luck, and remember to move the shutoff forward.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: Dean(IA)
Date Posted: 08 Oct 2023 at 8:42pm

Hi, Ed,

Thank you so much for the good advice. We will go after it another day.

Nice little tractor, but wish i had not run it out of fuel.

-------------
Dean(IA)